PA6 LGF40 | The Structural Upgrade For PA6 GF40

PA6 LGF40 | The Structural Upgrade For PA6 GF40

Details
LFT-G® PA6-NG03 is a high-performance long-fiber composite that takes the capabilities of PA6 GF40 to a new level by reinforcing a high-temperature Polyamide 6 (Nylon 6) matrix with a robust 40% long glass fiber skeleton.
√Excellent Modulus & Strength Properties
√Extreme Creep Resistance Under Load
√Ultimate Metal-Replacement Capabilities
Category
PA6 LGF Compound
 
Send Inquiry
Chat Now
Description
Technical Parameters

LFT-G® PA6 LGF40 | The Structural Upgrade for Demanding PA6 GF40 Applications

LFT PA6 LGF40: Beyond Standard PA6 GF40 Performance

When your application demands the strength of "PA6 GF40," the real question is: will it hold up over time? LFT-G® PA6-NG04 is engineered to do just that. It is a high-performance long-fiber composite that takes the capabilities of PA6 GF40 to a new level by reinforcing a high-temperature Polyamide 6 (Nylon 6) matrix with a robust 40% long glass fiber skeleton.

The higher fiber content delivers a dramatic increase in stiffness and strength, pushing this material firmly into the realm of metal replacement. The interconnected long fibers provide unparalleled resistance to creep and fatigue, making it the superior choice for structural parts under constant load and vibration, such as automotive pedal brackets and industrial power tool gearboxes.

Creep Resistance (@130°C)
SFT
LFT
Fatigue Life (Cycles)
SFT
LFT

Moving Up the Engineering Curve: LGF40 vs. LGF30

Increasing the long fiber content from 30% to 40% makes a significant shift along the performance curve, trading some impact for a major gain in stiffness-a critical step for structural metal replacement.

PA6 LGF30 VS LGF40 LONG FIBER COMPOSITE MATERIAL

Technical Data Sheet: LFT-G® PA6-NG04

Typical values for our high-stiffness LFT Polyamide 6 grade. Data presented is for Dry-As-Molded (DAM) condition.

Property Test Method Units Typical Value (DAM)
Long Glass Fiber Content ASTM D5630 % by weight 40
Density ASTM D792 g/cm³ 1.43
Tensile Strength ASTM D638 MPa 194
Flexural Modulus ASTM D790 GPa 10.2
Notched Izod Impact Strength (@23°C) ASTM D256 kJ/m² 35
Heat Deflection Temperature (@1.82 MPa) ASTM D648 °C 208

Download Complete LFT-G® PA6-NG04 Data Sheet PDF

Case Study: Automotive Pedal Box Assembly

An automotive pedal box assembly, a critical safety component

Challenge

Replace a multi-piece steel pedal box. Must withstand 3,000N panic-braking force with minimal deflection and pass 1 million fatigue cycles.

Solution

A single-piece design using LFT PA6 LGF40. The high stiffness prevents flex under load; the long fibers provide superior fatigue life.

Result

-50% Weight Reduction
-35% Cost Reduction (Part Consolidation)
>3 Million Cycles in Fatigue Testing

Applications for High-Stiffness Nylon LFT

The main structural housing for a professional power drill

Power Tool Gearboxes

Replaces die-cast aluminum. It must maintain perfect gear alignment under extreme torque and heat, making the high stiffness and thermal stability of LFT PA6 LGF40 essential.

 

A structural cross-car beam located behind the dashboard

Cross-Car Beams

A key structural component in the vehicle interior. LFT PA6 LGF40 provides the required rigidity and strength to support the dashboard and steering column, at a significant weight saving over steel.

A high-performance composite bicycle frame component

Bicycle Seat Posts & Stems

For high-end cycling components where stiffness, low weight, and vibration damping are critical for performance. It offers a cost-effective alternative to carbon fiber with excellent durability.

Key Questions Answered

1. What is the benefit of using 40% glass fiber (PA6 GF40) over 30%?

A: The jump from 30% to 40% long glass fiber provides a significant increase in stiffness (flexural modulus) and tensile strength. This makes PA6 LGF40 a more suitable candidate for demanding metal replacement applications where minimizing deflection under high loads is the primary design goal. The trade-off is a slight reduction in impact strength and higher material density.

2. How does LFT PA6 LGF40 compare to die-cast aluminum?

A: LFT PA6 LGF40 offers a superior stiffness-to-weight ratio. While aluminum has higher absolute stiffness, our composite is over 45% lighter. This allows for parts with similar performance to be made with significant weight savings. Additional benefits include part consolidation through injection molding, corrosion resistance, and better vibration damping.

3. Does humidity affect PA6 LGF40 parts in service?

A: Yes, it is a critical design consideration for all nylons. The part will absorb moisture, which will cause a slight decrease in stiffness and an increase in toughness and dimensional size. For applications with tight tolerances or constant high-load requirements, these changes must be accounted for during the engineering phase. Our technical team can provide data and support for designing with conditioned PA6.

Ready to Engineer the Next Breakthrough?

Elevate your product's performance with the proven strength and thermal stability of LFT-G® PA6 LGF40. Contact our material specialists today to discuss your project or request a material sample.

 

Hot Tags: pa6 lgf40 | the structural upgrade for pa6 gf40, China, manufacturers, suppliers, factory, buy, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!