What is PP GF60 ?
LFT-G® NG06H PP GF60 is a 60% long glass fiber reinforced Polypropylene composite with natural grade Homo-polymer. This is our ultimate performance thermoplastic, featuring a maximum 60% long glass fiber loading in a high-stiffness homopolymer matrix. It achieves the absolute pinnacle of rigidity and strength possible in a polypropylene composite. The resulting material is engineered for the most extreme structural applications and direct metal replacement, offering unparalleled load-bearing capacity and dimensional precision where maximum performance is non-negotiable.
PP-GF60 material properties?
LFT-G® NG06H PP-GF60 Datasheet
Mechanical PropertiesProperty |
Value |
Unit |
Test Standard |
|---|---|---|---|
| Tensile Strength | 155 | MPa | ISO 527 |
| Tensile Modulus | 13900 | MPa | ISO 527 |
| Elongation at Break | 1.8 - 2.5 | % | ISO 527 |
| Flexural Strength | 205 | MPa | ISO 178 |
| Flexural Modulus | 11536 | MPa | ISO 178 |
| Notched Izod Impact Strength (23°C) | 47 | kJ/m² |
ISO 180
|
| Notched Charpy Impact Strength (23°C) | 44 | kJ/m² |
ISO 179
|
Other PropertiesProperty |
Value |
Unit |
Test Standard |
|---|---|---|---|
|
Specific Gravity (Density)
|
1.49 |
g/cm³
|
ISO 1183
|
|
Molding Shrinkage (Flow)
|
0.2 - 0.4 | % |
ISO 294-4
|
|
Heat Deflection Temperature (1.8MPa)
|
155-163 |
°C
|
ISO 75-2/A
|
|
Melt Temperature
|
210 - 250 |
°C
|
|
|
Mold temperature
|
40 - 80 |
°C
|
Disclaimer: Please note: The data provided for LFT-G® PP GF60 represents typical values obtained from controlled laboratory testing according to international standards. These figures are intended for reference and comparison purposes only. The final properties of a molded component can be influenced by processing parameters, part design, colorant usage, and other manufacturing variables.
Download Complete NG06H PP-GF60 Datasheet PDF
Processing Information
To unlock the maximum potential of LFT-G® PP GF60, expert management of the injection molding process is critical. The extreme 60% glass fiber content requires specialized processing conditions and equipment to ensure the long fibers are preserved, which is the key to achieving the material's class-leading mechanical properties.
| ①Drying Time | 2-4 hours |
|
Drying Temperature |
80-100°C |
| ② Temperature Zone (Melt) | 220-240°C |
| ③Mold Temperature | 40-80°C |
Benefits Filled Long Glass fiber
- Maximum strength & modulus for replacing die-cast metal.
- Ultimate rigidity for applications demanding zero deflection.
- Exceptional creep resistance under constant high stress.
- Peak strength-to-weight ratio for critical lightweighting.
- Superior dimensional stability and precision tolerance.
- High heat deflection temperature for performance in hot environments.
What is PP glass filled used for?
Electrical Equipment Part
The extreme stiffness and dimensional precision of this material make any PP-GF60 part an ideal choice for high-precision electrical equipment housings and structural frames.
- Housings for industrial power inverters
- Structural chassis for servers and telecom equipment
- Mounting brackets for electrical switchgear
- Protective casings for high-voltage connectors
- Frames for large-format display screens
- Support structures for solar panel arrays
- Bodies for portable test and measurement devices
Washing Machine Component
With unparalleled strength and fatigue resistance, our PP GF60 material allows it to replace metal in the most demanding washing machine components and other heavy-duty appliance parts.
- Structural support spiders for washing machine drums
- Load-bearing base frames for commercial laundry units
- Motor mounting brackets subjected to high vibration
- High-stress gearbox components
- Balancer ring assemblies
- Structural frames for large appliances like dryers
- Heavy-duty dishwasher support frames
FAQ
Q: Why PP filled long glass fiber and not short glass fiber ?
A: Long glass fiber creates an internal skeletal network within the thermoplastic, providing vastly superior impact strength, stiffness, and creep resistance compared to the random orientation of short fibers. This structure allows for better stress transfer, resulting in a much tougher and more durable final part.
Q: What is PP-GF60 Can be used for?
A: PP-GF60 is used for extreme structural applications like replacing metal in automotive chassis, industrial machinery, and high-load brackets. As a concentrate, LFT-G®PP GF60 can be mixed to PP resin for improved mechanical performance and reduce cost in less critical components.
Q: How about your delivery Time?
A: Our general delivery time is 7-15 working days, though this can vary by region and order size. For a precise schedule for our long glass fiber reinforced materials, we recommend contacting our sales team directly with your specific requirements.
Hot Tags: ng06h-pp-gf60 material, China, manufacturers, suppliers, factory, buy, customized
