LFT PA6 LGF Application For Replace Metal To Make Skiing Part And Reduce Light-Solution Sharing

LFT-G company's long glass fiber reinforced PA6 material with different long glass fiber content is a modified reinforced composite material .LFT PA6 LGF reinforced composite material that obtained by adding different content of long glass fiber to the nylon PA6 matrix material and reinforcing it by certain production technology means.

LFT-G long glass fiber reinforced PA6 material has improved tensile strength, modulus, mechanical properties, impact properties, aging resistance, dimensional stability and heat resistance, and the strength and modulus of long glass fiber reinforced nylon PA6 have been improved compared with the short glass fiber reinforced method.

Product Application-Solution Share-Applying to skiing car part to reduce weight by replace metal.

As one of the ski sports tools, the use of ski car more and more popular, ski car will face a variety of complex snow road conditions, uneven surface and different height and weight of the use of the crowd. Moreover, the ski car in the use of bumps and vibrations, constant collision friction, noise, long time use of fatigue and so on, are ski car load-bearing parts to face the problem and challenge.

With these questions, a German ski bike manufacturer found us-XIAMEN LFT composite plastic  Co., Ltd. We are a manufacturer professional in product long fiber thermoplastic material. The German ski bike manufacturer provided further requirements and more believable information on the structure of the components.

The manufacturer of German ski carts states：

The tensile resistance of the parts is a hard requirement and provides relevant information about the ski car components: internal tolerances are measured at -0 / + 0.1 mm and the tolerance of the holes is -0 / + 0,1.

According to the relevant information provided by the customer, LFT-G company conducted a summary of the problem and performance requirements information, and then researched and recommended for the customer: LGF40% long glass fiber reinforced PA6 this product and sent the customer a trial sample.

The results of the LGF40% long glass fiber reinforced PA6 sample were as expected: the German ski car manufacturer decided to use this product.

After sample test,the data show that：

After testing the tensile properties of the product can reach their requirements of 170-180Mpa or even higher, fatigue resistance, wear resistance and other properties also meet the demand.

In addition, LGF 40% long glass fiber reinforced PA6 has lower specific gravity than metal material, which also reduces the weight of their products, making them lighter and more effective in mass production.

In other hand,German skiing manufacturers said:

In the examination of the parts, it is more important to look at the type of production process different from the metal material, injection molding can make the product have better shape, size and design performance is excellent.

Originally, they considered using metallic aluminum as the production material, but the tensile strength of metallic aluminum was around 100Mpa, which could not meet the demand, and the vibration noise of metallic aluminum in use was high. LGF 40% long glass fiber reinforced PA6 material provided by LFT -G company solved these problems for them, and the tensile strength reached over 170-180Mpa.