Conductive LCF50 PA6 Granules For Precision Components

Conductive LCF50 PA6 Granules For Precision Components

Details
LFT-G® PA6 LCF50 is a 50% long carbon fiber-reinforced PA6 compound that delivers outstanding rigidity, impact strength, and thermal performance for structural and automotive applications.
✓ High creep resistance & dimensional stability
✓ Excellent heat endurance & abrasion resistance
✓ Low warpage and predictable shrinkage
✓ Lightweight alternative to metal and short‑fiber grades
Category
PA6 LCF Compound
 
Description
Technical Parameters

LFT-G® PA6 LCF50 - Ultra-High Modulus Nylon

50% long carbon fiber  |  flame retardant  |  ultra-high modulus  |  dimensional precision  |  injection molding grade

LFT-G® PA6 LCF50 is a 50% long carbon fiber reinforced polyamide 6 (Nylon 6) composite formulated with flame-retardant additives to meet fire safety requirements in electrical, electronic, and transportation applications.

The continuous carbon fiber skeleton delivers stiffness and strength that rival die-cast metal, while the flame-retardant package provides the safety compliance required in high-risk environments.

With a tensile modulus , this composite delivers the load-bearing capacity and creep resistance needed for precision structural parts. The carbon fiber network also provides bulk-inherent electrical conductivity, making it suitable for ESD-safe components and EMI shielding applications. The material processes readily on standard injection molding equipment with proper low-shear screw design.

LFT-G® PA66 LCF50: Extreme Modulus Carbon Fiber with EMI Shielding

ResinPA6 (Nylon 6)
Fiber50% long carbon fiber
ColorBlack
Flame RatingHB @ 1.5 mm
HDT (1.8 MPa)208 °C

Why Engineers Choose PA6 LCF50

01 - ULTRA-HIGH MODULUS

50% long carbon fiber reinforcement delivers a tensile modulus approaching 35,000 MPa and flexural modulus over 24,000 MPa - metal-like rigidity at a fraction of the weight.

02 - FLAME SAFETY

Formulated with flame retardant additives to achieve an HB rating at 1.5 mm, suitable for applications requiring basic fire safety compliance.

03 - ELECTRICAL CONDUCTIVITY

The continuous carbon fiber network provides bulk-inherent static dissipation and EMI shielding capability for sensitive electronic and industrial components.

04 - THERMAL STABILITY

Heat deflection temperature of 208 °C at 1.8 MPa ensures reliable performance in high-temperature environments including engine compartments, industrial equipment, and under-hood applications.

05 - DIMENSIONAL PRECISION

Tight molding shrinkage of 0.10-0.30% delivers high dimensional accuracy for precision assembly and mating components in robotics and automation systems.

06 - CREEP & FATIGUE RESISTANCE

Continuous long fibers resist permanent deformation under sustained loads and cyclic stress, maintaining part geometry over extended service life in dynamic applications.

Technical Data Sheet

Data from the LFT-G PA6-BC05B official datasheet. Typical values for injection-molded specimens. Not for specification limits.

Property Value Method
Density 1.32 g/cm³ ASTM D-792
Molding Shrinkage (3.2 mm) 0.10 – 0.30 % ASTM D-955
Tensile Strength 298 MPa ISO 527
Tensile Modulus 34,585 MPa ISO 527
Tensile Elongation 0.7 – 1.5 % ISO 527
Flexural Strength 396 MPa GB/T 9341
Flexural Modulus 23,885 MPa GB/T 9341
Notched Izod Impact (23°C) 33 kJ/m² ISO 180
Notched Charpy Impact (23°C) 31 kJ/m² ISO 179
HDT @ 1.8 MPa 208 °C ISO 75-2
Flammability HB @ 1.5 mm ASTM D-635

 

Data from LFT-G PA6-BC05B official datasheet (Revised 09/03/2023). Consult the LFT-G technical team for application-specific recommendations.

Download PA6 LCF50 TDS

 

Processing Window

processing guide.png

PRE-DRYING
2–4 hrs @ 85–100 °C
Dehumidifying dryer
MELT TEMP
243–270 °C
Barrel measured
MOLD TEMP
54–95 °C
Measured, not set
INJECTION
69–124 MPa
Free-flow valve

Tip: Use metering screw 18:1–24:1 L/D, 40% feed, large open nozzle. Purge with PE or PP before shutdown. Do not leave carbon-filled melt in barrel for extended periods.

Where PA6 LCF50 Performs

EV Battery & High-Voltage Components

EV Battery & High-Voltage Components

Battery module housings, high-voltage connector bodies, and busbar supports demand both flame retardancy and electrical conductivity. PA6 LCF50 delivers HB fire safety with inherent static dissipation, meeting the requirements of modern EV power systems.

Electrical & Electronic Equipment

Electrical & Electronic Equipment

Control cabinets, switchgear components, and electronic enclosures use PA6 LCF50 for its fire safety compliance, EMI shielding capability, and dimensional stability that ensures reliable performance in compact electronic assemblies.

Industrial Automation & Robotics

Industrial Automation & Robotics

Robot end-effectors, gripper arms, and precision machine components benefit from the ultra-high stiffness of 50% long carbon fiber, enabling faster cycle times and higher payload capacity in automated manufacturing systems.

Aerospace & Transportation Interiors

Aerospace & Transportation Interiors

Aircraft interior brackets, seat frame components, and rail transit structural parts use PA6 LCF50 for its flame retardancy, low smoke emission, and exceptional strength-to-weight ratio that contributes to fuel efficiency and safety compliance.

Frequently Asked Questions

Q: What is the flame retardant rating of PA6 LCF50?

LFT-G® PA6 LCF50 is formulated with flame retardant additives and achieves HB rating at 1.5 mm thickness according to ASTM D-635. This rating indicates horizontal burning characteristics suitable for applications requiring basic fire safety compliance. For applications requiring higher flame ratings such as UL94 V-0, please contact our technical team to discuss custom formulations.

Q: Does the carbon fiber provide electrical conductivity?

Yes. The 50% long carbon fiber network is distributed throughout the entire part cross-section, providing bulk-inherent static dissipation and EMI shielding capability. This makes PA6 LCF50 suitable for ESD-safe components and electronic enclosures where static control is critical.

Q: What are the key processing considerations for PA6 LCF50?

Pre-dry to below 0.05% moisture content to prevent hydrolysis, maintain melt temperature between 243-270 °C to avoid thermal degradation, use mold temperatures of 54-95 °C for optimal surface finish, and minimize residence time. A low-compression screw and generous gating preserve fiber length and mechanical performance.

LFT team

Request Sample

LFT-G technical support – engineered for high-performance carbon fiber composites

Contact: Emily

Email: sale04@lfrtplastic.com

WhatsApp / Mobile: +86 188 5034 4811

 

 

Hot Tags: conductive lcf50 pa6 granules for precision components, China, manufacturers, suppliers, factory, buy, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!