What is PP GF30?
LFT-G® NG03H PP GF30 is a 30% long glass fiber reinforced Polypropylene composite with natural grade Homo-polymer. This advanced long glass fiber polypropylene material is engineered by incorporating a 30% weight content of high-strength long glass fibers into a durable polypropylene copolymer matrix. During the injection molding process, these fibers align and intertwine to form an internal three-dimensional skeletal network, imparting exceptional mechanical strength and structural integrity to the finished part.
PP GF30 material properties?
LFT-G® NG03H-PP GF30 Datasheet
Mechanical PropertiesProperty |
Value |
Unit |
Test Standard |
|---|---|---|---|
| Tensile Strength | 115 | MPa | ISO 527 |
| Tensile Modulus | 6850 | MPa | ISO 527 |
| Elongation at Break | 1.8 - 2.8 | % | ISO 527 |
| Flexural Strength | 153 | MPa | ISO 178 |
| Flexural Modulus | 4832 | MPa | ISO 178 |
| Notched Izod Impact Strength (23°C) | 35 | kJ/m² |
ISO 180
|
| Notched Charpy Impact Strength (23°C) | 32 | kJ/m² |
ISO 179
|
Other PropertiesProperty |
Value |
Unit |
Test Standard |
|---|---|---|---|
|
Specific Gravity (Density)
|
1.12 |
g/cm³
|
ISO 1183
|
|
Molding Shrinkage (Flow)
|
0.2 - 0.3 | % |
ISO 294-4
|
|
Heat Deflection Temperature (1.8MPa)
|
155-159 |
°C
|
ISO 75-2/A
|
|
Melt Temperature
|
210 - 250 |
°C
|
|
|
Mold temperature
|
40 - 80 |
°C
|
Disclaimer: Please note: The data provided for LFT-G® PP GF30 represents typical values obtained from controlled laboratory testing according to international standards. These figures are intended for reference and comparison purposes only. The final properties of a molded component can be influenced by processing parameters, part design, colorant usage, and other manufacturing variables.
Download Complete NG03H PP GF30 Data Sheet PDF
Processing Information
To unlock the full potential of LFT-G® PP GF30, precise control over the injection molding process is crucial. The primary objective is to preserve the length and integrity of the long glass fiber reinforcement, which is fundamental to achieving the material's superior mechanical properties.
| ①Drying Time | 2-4 hours |
|
Drying Temperature |
80-100°C |
| ② Temperature Zone (Melt) | 220-240°C |
| ③Mold Temperature | 40-80°C |
Benefits of Long fiber PP
- Exceptional impact strength/retaining at low-temperature
- High stiffness, for metal replacement/structural parts.
- Remarkable dimensional stability/low creep and low warpage.
- Long-term fatigue resistance for components under cyclic loads.
- Lightweighting compared to metals like steel or aluminum.
- Good resistance to chemicals & elevated extra temperatures.
What is PP GF30 used for?
Automotive Part
The superior strength-to-weight ratio of LFT-G® PP GF30 makes it a premier choice for the automotive industry, enabling significant vehicle weight reduction and enhanced fuel efficiency. This long glass fiber polypropylene is used for various structural and semi-structural components, including:
- Front-end carriers
- Instrument panel structures
- Door module assemblies
- Battery trays
- Seating structures
- Shifter bases
- Pedal boxes
- Under-body protection shields
Sport & Tool Components
The inherent toughness, high impact resistance, and durability of our PP GF30 material are highly valued in the production of professional tools and sporting equipment. It provides the resilience needed to endure repetitive use, high stress, and harsh conditions. Common applications include:
- High-impact power tool housings (drills, saws)
- Garden tool components (mower decks, trimmer heads)
- Structural frames for bicycles
- Ski and snowboard bindings
- Load-bearing elements in recreational vehicles.
FAQ
Q: Are you a manufacturer ?
A: Yes, we are a direct manufacturer and innovator of long glass fiber reinforced thermoplastic (LFT) composites. We welcome you to visit our production facility to see our capabilities firsthand.
Q: What is the density of LFT-G® PP GF30?
A: According to our technical datasheet, the density of LFT-G® PP GF30 is in the range of 1.11 to 1.12 g/cm³. This is equivalent to 1110 to 1120 kg/m³. This low density, combined with the material's high mechanical strength, results in an outstanding strength-to-weight ratio, which is a critical advantage for lightweighting projects.
Q: What is the cost of PP GF30?
A: The price for LFT-G® PP GF30 depends on factors such as order volume, specific grade requirements, and any custom additives or colors. For a precise quotation tailored to your project's needs, please contact our sales experts.
Hot Tags: gf30-pp-ng03, China, manufacturers, suppliers, factory, buy, customized
