Hybrid Reinforcement System
- PA66 LGF30 combines polyamide 66 matrix with 30% long glass fibers, creating a high-performance composite with exceptional thermal stability and mechanical strength. The covalent bonding between amine groups and silane-treated fibers enables superior stress transfer efficiency, achieving metal-like performance in critical dimensions.
Core Material Advantages:
- Thermal Resilience: Continuous service temperature up to 220°C with UL RTI 180°C rating
- Chemical Resistance: Withstands automotive fluids (DOT3/4, ATF) and weak acids
- Precision Molding: 0.2% mold shrinkage rate ensures tight dimensional tolerances
Certified Material Properties
| Property | LFT-G®PA66 LGF30 | PBT-GF30 | PA6-GF35 | Test Method |
|---|---|---|---|---|
| Tensile Strength | 168 MPa | 135 MPa | 162 MPa | ISO 527 |
| Flexural Modulus | 8.2 GPa | 7.2 GPa | 6.9 GPa | ISO 178 |
| Charpy Impact (Notched) | 30 kJ/m² | 25 kJ/m² | 27 kJ/m² | ISO 179 |
| HDT @1.8MPa | 255°C | 210°C | 233°C | ISO 75 |
| Density | 1.34 g/cm³ | 1.52 g/cm³ | 1.35 g/cm³ | ISO 1183 |
High-Temperature Application Solutions
Relative Application

car dashboard frame part

LFT-G® PA66 LGF30 Composite Granules

water pump impeller part
Automotive Thermal Systems
- Charge air cooler end caps withstanding 230°C peak temperatures
- EGR valve components with 5000h chemical resistance
Electrical Insulation
- CTI 600V electrical components for EV powertrains
- Miniaturized connector housings with 0.4mm wall thickness

Hybrid Vehicle Engine Thermal Shield
Sustainable Engineering
Environmental Compliance
- 30% bio-based PA66 matrix option available
- ROHS 3 (EU 2015/863) compliant formulation
Lifecycle Management
- Closed-loop recycling system with 85% material recovery
- ISO 14067 certified carbon footprint tracking
Precision Processing Parameters
Injection Molding Guidelines
| Parameter | Optimal Range | Critical Control |
|---|---|---|
| Barrel Temperature | 280-310°C | Prevent thermal degradation |
| Mold Temperature | 80-120°C | Ensure crystalline structure |
| Drying Conditions | 4h@120°C | ≤0.1% moisture content |
Tooling Requirements
- Vacuum venting system for complex geometries
- Hot runner nozzles with ≤0.15mm thermal variation
Hot Tags: lft-g® pa66 lgf30 engineering composite | high-temperature structural solution, China, manufacturers, suppliers, factory, buy, customized

