LFT-G® PA66 LGF40 – Long Glass Fiber Reinforced Nylon 66, 40% LGF Polyamide Composite

LFT-G® PA66 LGF40 – Long Glass Fiber Reinforced Nylon 66, 40% LGF Polyamide Composite

Details
LFT-G® Nylon 66 LGF40 PA66 is a composite material that combines nylon 66 resin with 40% long glass fiber reinforcement. The glass fibers are evenly dispersed throughout the material, resulting in a material that is highly resistant to impact and fatigue.
Category
PA66 LGF Compound
 
Send Inquiry
Chat Now
Description
Technical Parameters

LFT-G® PA66 LGF40 is a 40% long glass fiber reinforced nylon 66 composite - 5–25 mm pellets for injection-molded structural parts needing metal-like rigidity without metal weight.

PA66 GF40 is 40% short glass fiber nylon 66; LFT-G® PA66 LGF40 is its long-fiber upgrade - continuous fibers form a three-dimensional load-bearing network inside the PA66 matrix, raising stiffness, impact strength, and creep resistance beyond short-fiber grades.

At 215 MPa tensile and 254°C deflection, it fits mid-load housings, covers, and brackets where PA66 GF40 fatigues - and where die-cast aluminum costs too much.

LFT-G PA66 LGF40 long glass fiber reinforced nylon 66 granules
✓215MPa Tensile Strength
✓254°C Heat Deflection
✓37kJ/m² Impact Resistance
✓25KG Trial MOQ

Key Technical Specifications & 3D Skeletal Principle

Property Typical Value Test Standard
Tensile Strength 215 MPa ISO 527
Tensile Modulus 13588 MPa ISO 527
Flexural Strength 321 MPa GB/T 9341
Flexural Modulus 10250 MPa GB/T 9341
Notched Impact Strength 37 kJ/m² ISO 179
Heat Deflection Temp. (1.8 MPa) 254°C ISO 75-2
Short fiber vs long fiber internal structure comparison in reinforced nylon

Unlike chopped fibers that snap during plasticizing, 40% continuous glass fibers keep their length and freeze into an interlocked three-dimensional framework - the reason LGF40 PA66 beats GF40 in long-term stiffness and dimensional stability. Learn more about Long Fiber Tech →

Multi-Industry Applications & Replacement Value

Where PA66 GF40 hits its limit - oil-canning thin walls, rattling interiors, creeping housings - LGF40 PA66 takes over.

Engine Covers

Engine covers cycle heat above a 120°C-plus block. Short-fiber nylon softens and buzzes; the long-fiber network holds shape and damps vibration - no warping comebacks.

Instrument Panels & Door Handles

Interior trim takes daily abuse - UV, heat, constant touch. GF40 cracks at fasteners; LGF40's continuous fibers spread load so panels stay tight.

Home Appliance Structural Parts

Washer frames and vacuum housings need stiffness on a budget. LGF40 PA66 gives metal-like rigidity at a fraction of die-cast cost - one shot replaces them.

Fuel System Components

Fuel rails face chemicals plus under-hood heat. With 254°C deflection and strong chemical resistance, LGF40 PA66 holds tolerances where GF40 creeps.

Processing Parameters & Customization Options

Parameter Recommended Setting
Drying 3–5 hrs at 85–105°C, moisture below 0.05%
Melt Temperature 267–299°C
Mold Temperature 75–90°C
Injection Pressure 70–125 MPa
Gate Design ≥5–6 mm full-round sprue; no pinpoint gates

Dry with a dehumidifying dryer and keep gates generous - narrow gates chop long fibers and waste the stiffness you paid for. Flame-retardant, anti-UV, and custom colors on request.

Manufacturing Scale & International Certifications

Production runs in our Xiamen plant under ISO 9001, with SGS verification and a batch COA per shipment. QC checks each lot against the TDS - trial approved, bulk matches.

Frequently Asked Questions

Why upgrade from PA66 GF40 to LGF40?

Short fibers fracture in the screw; long fibers remain a structural network - 215 MPa tensile, higher fatigue life - for parts where GF40 keeps failing.

What is minimum order quantity?

25 kg per bag for trial material - prove it in your own tool first. Bulk pricing from 500 kg; WhatsApp for a same-day quote.

What gate size for PA66 LGF40 molding?

Use a 5–6 mm full-round sprue with direct gates - never pinpoint gates. Small gates shear long fibers short and erase the LGF advantage.

Sample Request & Fast RFQ Channel

Request Technical Trial Sample

Building engine covers, appliance frames, or fuel parts needing 254°C heat resistance and 10250 MPa stiffness? Talk to LFT-G engineers and request a 25KG PA66 LGF40 NG04 trial sample.

Request 25KG Trial Sample

Email Inquiry: Candyhu@lfrtplastic.com

WhatsApp Directly: +86 13950095707

LFT-G team group photo at Chinaplas exhibition booth

 

Hot Tags: pa66 lgf40, pa66 gf40 upgrade to lgf40, long glass fiber reinforced nylon 66, lft-g pa66 lgf40 composite, 40% lgf polyamide 66 granules, china pa66 lgf40 manufacturers

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!