LFT PA6 Long Glass Fiber Materials Factory

Data Sheets details

Here is a summary of some of the talented netizens. They describe the knowledge of PA6 from the perspective of the mold, and share it with everyone.

Since the solidification time of PA6 is very short, the position of the gate is very important. Gate aperture should not be less than 0.5*t

(where t is the thickness of the plastic part). If a hot runner is used, the gate size should be smaller than with a conventional runner because the hot runner can help prevent premature solidification of the material. If a submerged gate is used, the minimum diameter of the gate should be 0.75 mm.

The LFT plant adds long glass fiber processing and extrusion to the original PA6, which can be used for industrial engineering plastic parts.

Please contact Amy