The Cost-Effective, Heavy-Duty Impact Champion
LFT-G® PA6 LGF40 (PA6-NA-NG04) leverages the inherent yielding toughness of Polyamide 6 to create an industrial-grade structural composite capable of surviving immense dynamic impacts and severe vibrations. While standard short-fiber plastics shatter under heavy kinetic loads, this 40% long glass fiber network acts as an unbreakable internal skeleton. It offers a unique combination of high strength, superior NVH (Noise, Vibration, and Harshness) dampening, and cost-effectiveness, making it the definitive lightweight alternative to die-cast zinc and heavy steel brackets.
Typical values shown above are for quick engineering reference. PA6 LGF40 provides naturally superior vibration isolation properties compared to highly crystalline PA66 equivalents, making it ideal for engine and motor mounts.
PA6 LGF40 Material Specifications
This section defines the commercial grade, polymer system, and key material characteristics of LFT-G® PA6 LGF40.
| Property | Specification |
|---|---|
| Product Grade / Code | LFT-G® PA6-NA-NG04 |
| Material Type | 40% Long Glass Fiber Reinforced Polyamide 6 |
| Polymer Matrix | Polyamide 6 (PA6 / Nylon 6) |
| Glass / Carbon Content | 40% Long Glass Fiber |
| Available Color | Black, Natural (Customizable) |
| Form / Pellet Length | Pellets (Length: 10mm - 12mm) |
| Processing Method | Injection Molding |
| Typical Positioning | Heavy-Duty Impact & Cost-Effective Steel Replacement |
Typical Material Properties of PA6 LGF40
| Property | Standard | Value |
|---|---|---|
| Density | ISO 1183 | 1.43 g/cm³ |
| Molding Shrinkage | ISO 294-4 | 0.15–0.35% |
| Tensile Strength | ISO 527 | 189 MPa |
| Tensile Modulus | ISO 527 | 12,588 MPa |
| Elongation at Break | ISO 527 | 1.7–2.5% |
| Property | Standard | Value |
|---|---|---|
| Flexural Strength | ISO 178 | 283 MPa |
| Flexural Modulus | ISO 178 | 9,623 MPa |
| Notched Charpy Impact | ISO 179 | 34 kJ/m² |
| HDT (1.8 MPa) | ISO 75-2 | 208 °C |
| Flammability | UL 94 | HB |
Typical values are provided for engineering reference. Actual molded-part performance depends on processing temperatures and mold design. PA6 polymers are hygroscopic; moisture conditioning will increase impact strength while slightly reducing modulus.
Injection Processing Guidelines for PA6 LGF40
Dehumidifying
80–100°C / 4–6h
Strictly dry to < 0.15% moisture
Melt Temp
243–270°C
Do not exceed 300°C (degradation)
Mold Temp
80–100°C
Required for good surface finish
Sprue Gate Sizing
Bigger Gates(>3mm)
Crucial for preserving fiber length
Engineered for Extreme Impact & Vibration Control
The PA6 LGF40 compound is the supreme choice for heavy-duty components that must survive massive kinetic impacts, extreme low temperatures, and continuous resonant vibration without breaking the budget.
Agricultural & Construction Machinery Parts
Engineering challenge: Tractor pedals, structural debris shields, and heavy machinery covers face constant, violent physical impacts from flying rocks and rugged terrain. Expensive carbon fiber is budget-prohibitive, while short glass fiber shatters easily.
Why PA6 LGF40: The 40% long glass fiber creates a durable, impact-absorbing 3D skeleton within the tough PA6 matrix (34 kJ/m² notched impact). It delivers steel-like survival rates at a fraction of the weight and cost, completely eliminating rusting issues.
Automotive Engine Mounts & NVH Brackets
Engineering challenge: Structural brackets connecting the powertrain to the vehicle chassis must support massive static loads while aggressively isolating high-frequency engine vibrations (NVH) from the passenger cabin.
Why PA6 LGF40: Unlike rigid PA66, the PA6 polymer structure acts as a natural acoustic and kinetic dampener. When combined with the 12,588 MPa stiffness of long glass fibers, it forms the perfect composite bracket to absorb engine resonance while surviving severe road shocks.
Extreme Winter Sports Bindings
Engineering challenge: Snowboard and ski bindings endure violent torque loads during high-speed maneuvers. Most importantly, plastics become dangerously brittle in freezing, sub-zero mountain environments.
Why PA6 LGF40: PA6 inherently retains its impact toughness at freezing temperatures far better than competing polymers. The 40% long glass reinforcement ensures the binding remains rigid enough to transfer precise steering forces from the rider's boot directly to the board.
Explore Related Long Glass Fiber Grades
Compare PA6 LGF40 with our other fiber loadings and polymer matrices to find the perfect mechanical balance for your specific molding project.
PA6 LGF30
30% Long Glass Fiber PA6. Offers easier injection flowability and lighter weight, ideal for structural components with highly complex geometries and thinner walls.
View Grade →PA6 LGF40
40% glass fiber providing an optimized balance of immense structural rigidity, extreme impact toughness, and superior NVH vibration dampening.
Current GradePA66 LGF40
Upgrades the matrix to PA66, sacrificing a small amount of impact toughness to achieve higher flexural modulus and significantly improved heat resistance.
View Grade →Request PA6-NA-NG04 Technical Trial Sample 
Are you actively looking to replace heavy steel or die-cast zinc components with a lightweight, high-impact composite? Contact the LFT-G engineering team to discuss your NVH or metal replacement project and request a 25KG PA6 LGF40 technical trial sample.
Email Inquiry: Candyhu@lfrtplastic.com
WhatsApp Directly: +86 13950095707
Hot Tags: LFT-G® PA6 LGF40 NG04, China, manufacturers, suppliers, factory, buy, customized




