LFT-G® LGF40 PBT Polybutylene Terephthalate

LFT-G® LGF40 PBT Polybutylene Terephthalate

Xiamen LFT Composite Plastic Co.,Ltd is a unique long fiber reinforced thermoplastics plastic manufacture.
Our material have following properties.
1.Improved impact
2.Safer impact mode
3.Reduced warpage
4.Improved creep resistance

Send InquiryChat Now

 

LFT-G® LGF40 PBT Polybutylene Terephthalate


LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg


Long fiber reinforced thermoplastics or long fiber thermoplastics (LFT) are bulk molding materials that can feature continuous fiber filaments running the full length of the pellet allowing materials to exhibit simultaneous improvements in stiffness, strength, and impact resistance over different temperatures.

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

The pyrolysis and combustion to display the internal structure of fiber plastic injection molding parts.

- Frame fiber network by long fibers and interwoven.

-Keep the details of the - shows the structural features of these elements.

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

Product nameLFT-G® LGF40 PBT Polybutylene Terephthalate

Product model 

LFT-PBT-NA-LGF40

Color

Accoding to customer's required

Shapepellets and granules

Type

Long glass fiber filled Polybutylene Terephthalate



Advantage

Good physical properties

High strength

Low warpage,high toughness

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg                                          


                         LFT-G® LGF40 PBT Polybutylene Terephthalate

                                        Injection Grade   Filling content : 40%Long glass fiber

ItemTypical DataTesting Standard
Specific Gravity1.63ASTM D-792
Molding Shrinkage0.10-0.30%ASTM D-955(1/8 in (3.2 mm) section)
Tensile Strength169 MPaASTM D-638
Tensile Modulus13100 MPaASTM D-638
Tensile Elongation2.0-3.0%ASTM D-638
Flexural Strength252MPaASTM D-790
Flexural Modulus12411 MPaASTM D-790
Notched Izod Impact240 J/mASTM D-256
Un-Notched Izod Impact1014J/mASTM D-4812
Deflection Temperature204℃ASTM D-648
Flame Retardant
HB @ 1.5 mmASTM D-635
                                            General Processing For Injection Moulding
Injection Pressure69 - 124 MPa
Melt Temperature 238 - 271 °C
Mould temperature66 - 121 °C
Pre-drying4 hrs @ 121 °C
Moisture Content0.02 %
Dew Point-29 °C



application.jpg

long fiber filled pbt application.jpg

certification.jpg

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

LFT-G® LGF40 PBT Polybutylene Terephthalate.jpg

LFT-G® LGF40 PBT Polybutylene Terephthalate.png

Inquiry