Long Carbon Fiber Composites PPS

Long Carbon Fiber Composites PPS

LFT-G® Xiamen LFT Composite Plastic Co.,Ltd is a unique long fiber reinforced thermoplastics plastic manufacture. Our material have following properties. 1.Improved impact 2.Safer impact mode 3.Reduced warpage 4.Improved creep resistance

Send InquiryChat Now

Long Carbon Fiber composites PPS


Interfacial micromechanical performance of carbon fiber (CF) reinforced polyphenylene sulfide (PPS) composite was studied by the microbond test. A novel homemade apparatus which is operated simply was employed and a different microsample preparation method was introduced. Comparative tests at various loading speeds were made to investigate the influence of testing rate on the interfacial shear strength of CF/PPS micro-composite. It was found that the interfacial shear strength increased with increasing fiber embedded length at speeds below 0.02 mm/s and above 0.04 mm/s, but it was constant between 0.02 and 0.04 mm/s. It is recommended to perform the microbond test in the test rate range of 0.02–0.04 mm/s, where the interfacial shear strength does not change with the embedded length and no significant deviations are observed, thus could better reflect the true interface strength of the composite.

PPS long fiber's .jpg



related product.jpg

Carbon Fiber Compound PPS LCF30.jpg Carbon Fiber Compound PPS LCF30.jpg pp filled long glass fiber.jpg Carbon Fiber Compound PPS LCF30.jpg

  LFT-PA6                   LFT-TPU               LFT-PP                      LFT-PPS



 ● R&D team composed of many professional doctors and masters, over 10 years R&D and production experience in modified plastics.

   ● Experienced analysis and testing team, owning leading and complete experimental equipment.

   ● Production team with world-class factory management experience.