TPU LFT For Safety Shoes Head

TPU LFT For Safety Shoes Head

Xiamen LFT Composite Plastic Co.,Ltd is a unique long fiber reinforced thermoplastics plastic manufacture. Our TPU LFT For Safety Shoes Head have following properties.
1.Improved impact
2.Safer impact mode
3.Reduced warpage
4.Improved creep resistance

Send InquiryChat Now


TPU LFT for safety shoes head

   a


Product Details

50% Long Glass Fiber Reinforced PA 6.png

NameTPU LFT for safety shoes head
MaterialRigid TPU
TypeLFRT Long glass fiber reinforced tpu
AppearanceLFRT TPU Granule
Length5-25mm
Usagesafety shoes head


Feature

Good mechanical properties
Excellent abrasion resistance
Resistance to low temperature

TPU long fiber's .jpg

Long glass fiber reinforced TPU

50% Long Glass Fiber Reinforced PA 6.png

The friction and dry slide wear behavior of long glass fiber (LGF) reinforced thermoplastic polyurethane (TPU) composites was studied in this article. The LGFs were mixed by 20, 30, and 40 wt% in TPU matrix. Composites were processed by the injection molding technique. The un-lubricated pin—on-disk wear tests were conducted by varying the load and sliding velocity. The results reveal that the slide wear loss increases with increasing load/sliding velocity. The coefficient of friction increases with increase in sliding velocity. The coefficient of friction and wear rate of the composites decreased with increase in LGF content. Further, 40% LGF reinforced TPU composite exhibited lower friction coefficient and wear rate than 20 and 30% LGF reinforced TPU composites. The worn surface features have been explained using scanning electron microscopy.High performance LFT.jpg

TDS of 20% Long Glass Fiber reinforced RTPU

50% Long Glass Fiber Reinforced PA 6.png

RTPU-NA-LGF20.png

NOTE:

Data is typical data for reference only.


Contact

50% Long Glass Fiber Reinforced PA 6.png

LFT contact.jpg

Inquiry