30glass Fiber filled PP Polyprooylene LFT-G material

PP-LGF material is a reinforced thermoplastic that raw polypropylene resin filled 20-60%Long glass/carbon fiber by LFT-G way.

Long fiber PP can significantly improve product rigidity, impact strength, creep resistance, and dimensional stability, and it can be used to create complex automotive module products. Long glass fiber reinforced polypropylene will surely become an ideal carrier material for modules, and as a necessary consequence, LGFPP material is meant to replace GMT material as an automotive module application. LGFPP material will not deform under high temperature and long time lower capacity conditions, allowing its products to have good dimensional stability. LFT-PP is currently used extensively in automotive, power tools, home appliances, and water treatment components. However, each field has different LFT-PP requirements, so please contact us for more information.

LFT Introduction
Long fiber reinforced thermoplastics(LFT) can be subdivided into LFT-G and LFT-D and so on according to the processing.The key points of the LFT-G production reinforced material that developed byXIAMEN LFT are stable and controllable of precess, high production efficiency.Reinforced fibre: glass fiber, carbon fiber,basalt fiber· Content of fiber: 30%, 40%, 50%, 60%Long glass/carbon fiber.Methods of fiber discharge:internal and external.

Features of LFT-G

The length of the long fiber reinforced granular material produced by LFT-G technology is controllabel. The length of final products is not less the 5mm. High strength, higher modulus of elasticity, higher impact resistance, long service life of this final products, that have broad prospects in the lightweight, high performance of components in the aerospace, automotive, construction, appliances and other industries.
· The blending strength and tensile strength increase 100%-300%.· The impact resistance increases by 2-3 times.
· Excellent performance of high temperature resistance and creep resistance. Fits the occasion where high temperature and low temperature alternate frequently.
· High dimensional accuracy. Low distortion. Low as well as the same longitudinal and transverse shrinkage rate .
· Simple forming precess. Excellent performance of fatigue resistance.
· Low warping. The glass fiber is hardly revealed. Better surface property.· Recyclable, reusable. Environmental.

If you have other question like the following:

1. What is the LFT-G material? Where is LFT-G company?

2. What is the PP-LGF/PA-LGF,TPU-LGF about LFT ?

3. What is the application about LFT (PA-LGF,PP-LGF.ABS-LCF,TPU-LGF) ?

4. How to inject/extrude LFT material?
   

Contact US: candyhu@lfrtplastic.com Whatsapp/Skype/Wechat:+8613950095707