30 Long Glass Filled Nylon 6
Product Description
| Product name | Long glass fiber reinforced PA 6 |
|
Product model |
PA6-NA-LGF30 |
|
Color |
As required |
|
Advantage |
Good mechaical properties and High rigidity |
|
Low shrinkage,dimensional stability |
|
|
High Heat Resistance,High impact resistance, non flammable |
 Long glass fiber reinforced nylon 6 compared with the standard of glass fiber reinforced high performance polyamide, LFT fell (long fiber reinforced thermoplastics) technology can improve stiffness at 23 ° C temperature 10 ~ 15%, and 85% at 120 ° C temperature increase stiffness. |
Technical Data Sheet
|
Item |
Typical Characteristic |
Testing Standard |
|
Specific Gravity |
1.36 g/cm³ |
ASTM D-792 |
|
Molding Shrinkage |
0.10 - 0.30 % |
ASTM D-955(1/8 in (3.2 mm) section) |
|
Tensile Strength |
174 MPa |
ASTM D-638 |
|
Tensile Modulus |
9655 MPa |
ASTM D-638 |
|
Tensile Elongation |
2.0 - 3.0 % |
ASTM D-638 |
|
Flexural Strength |
268 MPa |
ASTM D-790 |
|
Flexural Modulus |
9655 MPa |
ASTM D-790 |
|
Notched Izod Impact |
240 J/m |
ASTM D-256 |
|
Un-Notched Izod Impact |
854 J/m |
ASTM D-4812 |
|
Flame Retardant |
HB @ 1.5 mm |
ASTM D-635 |
|
General Processing For Injection Moulding |
||
|
Injection Pressure : 69 - 124 MPa |
||
|
Melt Temperature : 243 - 271 °C |
||
|
Mould temperature : 54 - 93 °C |
||
|
Pre-drying : 2 hrs @ 82 °C |
||
|
Moisture Content : 0.20 % |
||
|
Dew Point ： -29 °C |
||
Application Range
LFT Certification
LFT Team
|
Why Choose Us |
|
|
2. The most suitable,precise and alternative material solutions suggestion 3. Costing down,the most competitive price based on good and suitable quality 4. Quickest delivery period according to customers requirement
|
Hot Tags: 30 glass filled nylon 6, China, manufacturers, suppliers, factory, buy, customized
