LFT-G® PA66 LCF50: Extreme Modulus Carbon Fiber with EMI Shielding

LFT-G® PA66 LCF50: Extreme Modulus Carbon Fiber with EMI Shielding

Details
LFT-G® PA66 LCF50-BC05B represents the apex of structural thermoplastic engineering for advanced industrial applications. Formulated with a 50% industrial-grade long carbon fiber network within a polyamide 66 matrix, this compound shatters the performance limits of standard glass-filled resins. It delivers an astonishing combination of extreme stiffness, profound dimensional stability under high temperatures, and inherent EMI/RFI shielding capabilities. It is the ultimate lightweight solution for engineers replacing heavy zinc and aluminum in automotive electronics, robotics, and high-stress structural components.
√318 MPa Extreme Tensile Strength
√30,000 MPa Flexural Modulus
√Inherent EMI / RFI Shielding
√1.37 g/cm³ Ultra-Low Density
√20KG/Bag Direct Trial MOQ
Category
PA66 LCF Compound
 
Description
Technical Parameters

The Apex of Industrial Stiffness & Electromagnetic Shielding

LFT-G® PA66 LCF50-BC05B is a 50% long carbon fiber reinforced polyamide 66 compound engineered for peak industrial performance. Carbon fiber is inherently conductive and dramatically stiffer than glass fiber. This proprietary compound not only offers a staggering flexural modulus exceeding 30,000 MPa for absolute structural rigidity but also acts as an effective shield against electromagnetic and radio frequency interference (EMI/RFI). It is specifically formulated to make metal replacement a commercial reality for advanced automotive sensors, industrial robotics, and high-end consumer equipment.

30,000 MPa
Extreme Flexural Modulus
 
318 MPa
Tensile Strength
 
EMI / RFI
Inherent Shielding
 
257 °C
Heat Deflection (HDT)
 

Typical values shown above are for quick engineering reference. Due to the high stiffness of 50% carbon fiber, mold design and gate sizes directly impact final mechanical properties. See the technical data section below.

PA66 LCF50-BC05B Material Specifications

This section defines the exact commercial SKU, polymer system, and key material characteristics of this specialized long carbon fiber formulation.

Property Specification
Exact Product Grade LFT-G® PA66 LCF50-BC05B
Material Description 50% Long Carbon Fiber Reinforced Polyamide 66
Fiber Origin / Series Industrial-Grade High-Performance Series
Polymer Matrix Polyamide 66 (PA66 / Nylon 66)
Key Modifier Property Electrical Conductivity & EMI Shielding
Form / Pellet Length Black Pellets (Length: 10mm - 12mm)
Processing Method Injection Molding

Typical Material Properties of PA66 LCF50

Property Standard Value
Density ISO 1183 1.37 g/cm³
Molding Shrinkage ISO 294-4 0.10–0.20%
Tensile Strength ISO 527 318 MPa
Tensile Modulus ISO 527 30,000 MPa
Elongation at Break ISO 527 1.0–2.0%
Property Standard Value
Flexural Strength ISO 178 453 MPa
Flexural Modulus ISO 178 30,000 MPa
Notched Charpy Impact ISO 179 30 kJ/m²
HDT (1.8 MPa) ISO 75-2 257 °C
Surface Resistivity IEC 60093 103 – 104Ω (Conductive)

Typical values are provided for engineering reference. Actual molded-part performance depends heavily on tooling gating (which affects carbon fiber length retention) and processing temperatures.

Injection Processing Guidelines for Carbon Fiber PA66

1

Pre-drying (Crucial)

85–110°C / 3–5h
PA66 absorbs moisture.

Target < 0.1%

2

Melt Temp

267–300°C
Requires higher temps than GF resins

3

Mold Temp

80–100°C
High mold temp required for glossy finish

4

Tooling Wear

High Hardness Steel
Carbon fiber is highly abrasive

Carbon Fiber Specific Note: 50% carbon fiber significantly increases melt viscosity and abrasiveness compared to standard glass fiber. Use large gate sizes (sprue or edge gates) to prevent excessive fiber breakage during injection, ensuring the final molded part achieves its maximum EMI shielding and 25,000+ MPa modulus.

High-End Industrial & Electrified Applications

PA66 LCF50 is the material of choice when standard glass-reinforced plastics fail to meet absolute weight limits, extreme stiffness demands, or conductivity requirements. It enables radical redesigns in advanced technology sectors.

ADAS Sensor Housing and EMI Shielding enclosures

EV ADAS Housings & EMI Enclosures

Engineering challenge: Autonomous driving sensors (LiDAR/Radar) and EV control modules require zero electromagnetic interference and absolute dimensional stability under hood temperatures.

Why PA66 LCF50: The 50% carbon fiber network makes the plastic inherently conductive, eliminating the need for expensive secondary metallic shielding sprays. The PA66 matrix withstands prolonged high temperatures.

Industrial robotic end of arm tooling carbon fiber

Industrial Robotics (End-of-Arm Tooling)

Engineering challenge: Robotic arms operating at ultra-high speeds suffer from payload-induced vibration. Heavy metal components limit payload capacity and accelerate motor wear.

Why PA66 LCF50: At only 1.37 g/cm³, it slashes component mass while delivering an immense 25,000 MPa modulus. This eradicates flex and vibration resonance, allowing robots to move faster with higher precision.

High-end Bicycle sport part pedal made by pa66 long carbon fiber lightweight

Elite Sporting Goods (Bicycle Components)

Engineering challenge: Professional sports equipment (like clipless pedal bodies and derailleur cages) demands ruthless weight shedding coupled with zero flex during explosive power transfer.

Why PA66 LCF50: It offers the premium strength-to-weight ratio demanded by professional athletes. Injection molding carbon fiber allows for mass-producing highly complex, aerodynamic shapes that traditional hand-laid carbon cannot achieve cost-effectively.

Explore Related Long Carbon Fiber Grades

If 50% carbon fiber presents processing challenges for your specific mold complexity, consider exploring our lower carbon-filled derivatives.

PA66 LCF30

30% carbon fiber offering superior injection moldability, excellent surface finish, and potent anti-static properties.

View Grade →

PA66 LCF40

40% carbon fiber providing an optimized balance of immense structural rigidity and manageable melt viscosity.

View Grade →

PA66 LCF50

The absolute pinnacle of reinforcement, engineered for maximum load-bearing and electromagnetic shielding.

Current Grade

LFT-G Special Compounds Quality Assurance

Manufacturing 50% long carbon fiber demands extreme precision in pultrusion technology. LFT-G's specialized production lines ensure maximum fiber length retention within the pellets, translating to unparalleled mechanical and electrical properties in your final molded parts.

LFT-G ISO and EMS certificates

ISO 9001:2015

Quality Management Systems Certified

SGS Checked

Material Verification & Audited Provenance

RoHS & REACH

Compliance documentation available as applicable

Frequently Asked Questions (FAQ)

Q1: How does Carbon Fiber (LCF) differ from Glass Fiber (LGF)?

Long Carbon Fiber provides a radically higher modulus (stiffness) and much lower density than Glass Fiber. Crucially, carbon is electrically conductive, making PA66 LCF50 ideal for electrostatic discharge (ESD) and EMI shielding applications where glass fiber is useless.

Q2: What does the "BC05B" in the grade name signify?

BC05B indicates this is a 50% Industrial-Grade Carbon Fiber formulation. It is designed to provide exceptional mechanical rigidity and conductivity while remaining highly cost-effective for mass industrial and automotive production, bypassing the severe premiums of aerospace-grade fibers.

Q3: Is PA66 LCF50 difficult to injection mold?

Yes, 50% carbon fiber significantly increases melt viscosity. Molds must be designed with generous, low-shear gating systems to prevent fiber breakage. Additionally, the PA66 matrix must be strictly pre-dried to below 0.1% moisture to prevent surface defects.

Request PA66 LCF50 Technical Trial Sample & Quotation LFT-G technical team at an industry exhibition

Upgrading your components with industrial carbon fiber? Contact the LFT-G engineers to discuss EMI shielding requirements, structural load limits, and to request a 25KG PA66 LCF50 technical trial sample.

Request 25KG Carbon Fiber Trial Sample

Email Inquiry: Candyhu@lfrtplastic.com

WhatsApp Directly: +86 13950095707

 

 

Hot Tags: LFT-G® PA66 LCF50: Extreme Modulus Carbon Fiber with EMI Shielding, China, manufacturers, suppliers, factory, buy, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!