Polymer Nylon 6 Used In The Aerospace Technology

Polymer Nylon 6 used in the aerospace technology

Product Details

The high polymer nylon material is an important material basis for the development of aerospace technology. The birth of a new generation of aerospace products is often based on the successful development of a large number of new materials, and can also drive the rapid start-up and application of many new materials projects.

Application aerospace technology

◆The high polymer nylon material has outstanding wear resistance. Its friction coefficient is usually 0.1-0.3 as 1/4 of phenolic plastic cloth, and 1/3 of Ba-type alloy is an excellent self-lubricating material with good mechanical properties. Nylon products have high hardness, high tensile strength, bending resistance and impact strength and high elongation. Their compressive strength is comparable to that of metal, and its fatigue strength is equivalent to that of cast iron and aluminum alloy. Stable chemical stability, it is not affected by chemicals such as weak bases, alcohols, hydrocarbons, and oils. Light weight, good toughness, strong wear resistance, oil resistance, shock resistance, etc.

As a thermoplastic material that has been used in the aerospace industry, high-molecular nylon has become an indispensable part of aerospace materials.

FAQ

Q1:How to choose the reinforcement method and length of the material by using long fiber reinforced thermoplastic material?

A:The selection of materials depends on the requirements of the products. It is necessary to assess how much the content is enhanced and how much length is appropriate depending on the performance requirements of the products.

Q2:Long glass fiber and long carbon fiber products are prone to floating fiber reasons and solutions?

A:Due to the low temperature of the sol or the low temperature of the mold and the low injection molding pressure, the glass fiber and the resin can not be well compatible and diffused. The uneven mold temperature on the mold surface will cause the floating fiber problem, and the sol temperature and mold temperature will be increased. Increase the injection pressure.

Contact Information