What is PA6 CF30 ?
LFT-G® BC03B PA6 CF30 is a 30% long carbon fiber reinforced polyamide6(nylon6) Compound, also called nylon6 carbon fiber material. This is a premier engineering thermoplastic composite, combining a high-performance polyamide 6 matrix with 30% long carbon fiber. The result is a material with an exceptional stiffness-to-weight ratio, high strength, and superior fatigue resistance. The carbon fiber reinforcement also provides excellent dimensional stability and a higher heat deflection temperature, making PA6 CF30 ideal for precision components in automotive, aerospace, and high-end industrial applications where lightweight strength is paramount.
Nylon6 carbon fiber material properties?
LFT-G® BC03B PA6-CF 30 Datasheet
Mechanical PropertiesProperty |
Value |
Unit |
Test Standard |
|---|---|---|---|
| Tensile Strength | 231 | MPa | ISO 527 |
| Tensile Modulus | 22120 | MPa | ISO 527 |
| Elongation at Break | 0.8 - 1.5 | % | ISO 527 |
| Flexural Strength | 331 | MPa | ISO 178 |
| Flexural Modulus | 14096 | MPa | ISO 178 |
| Notched Izod Impact Strength (23°C) | 352 | J/m |
ISO 180
|
| Notched Charpy Impact Strength (23°C) | 37 | kJ/m² |
ISO 179
|
Other PropertiesProperty |
Value |
Unit |
Test Standard |
|---|---|---|---|
|
Specific Gravity (Density)
|
1.24 |
g/cm³
|
ISO 1183
|
|
Molding Shrinkage (Flow)
|
0.1 - 0.3 | % |
ISO 294-4
|
|
Heat Deflection Temperature (1.8MPa)
|
208 |
°C
|
ISO 75-2/A
|
|
Melt Temperature
|
240 - 270 |
°C
|
|
|
Mold temperature
|
54 - 95 |
°C
|
Disclaimer: Please note: The data provided for LFT-G® PA6 CF30 represents typical values obtained from controlled laboratory testing according to international standards. These figures are intended for reference and comparison purposes only. The final properties of a molded component can be influenced by processing parameters, part design, colorant usage, and other manufacturing variables.
Download Complete BC03B PA6-CF 30 Datasheet PDF
Processing Information
To unlock the maximum potential of LFT-G® PA6 CF30, expert management of the injection molding process is critical. The long carbon fiber reinforcement requires specialized processing conditions and equipment to ensure the fibers are preserved, which is the key to achieving the material's class-leading mechanical properties and performance.
| ①Drying Time | 4-6 hours |
|
Drying Temperature |
80-120°C |
| ② Temperature Zone (Melt) | 240-270°C |
| ③Mold Temperature | 54-95°C |
Benefits Filled Long Carbon fiber
- Extreme stiffness & strength at a very low weight.
- Superior fatigue endurance for parts under cyclic loading.
- Exceptional dimensional stability and very low thermal expansion.
- High heat deflection temperature for performance in hot environments.
- Excellent creep resistance under constant high stress.
- Inherent electrical conductivity for ESD/EMI shielding applications.
What is PA6-CF used for?
Automotive Part
The superior strength-to-weight ratio of this thermoplastic makes any PA6-CF30 part a perfect solution for lightweighting high-performance automotive components, from structural to powertrain.
- Structural chassis brackets
- Engine covers and intake manifolds
- Transmission components and clutch parts
- Mirror housings and support stalks
- Pedal boxes and shifter assemblies
- Seat frames
- Fuel cap doors
- Components for electric vehicle battery systems
Sport Equipment Part
With exceptional stiffness and low density, our LFT-G®PA6 CF30 carbon fiber nylon material is a top choice for creating professional-grade sporting goods where every gram matters.
- High-end bicycle frames and crank arms
- Drone frames and propellers
- Tennis racket frames
- Ski bindings and poles
- Racing kayak paddles
- Components for high-performance archery bows
- Hockey stick blades
FAQ
Q: Can your PA6 CF30 used for 3d printer ?
A: Our LFT-G®PA6 CF30 is supplied as pellets specifically formulated for high-performance injection molding, not as a filament for 3D printing. The injection process is required to achieve the optimal long fiber structure and mechanical properties.
Q: What temperature does PA6-CF dry at?
A: As Polyamide 6 is hygroscopic (absorbs moisture), we recommend pre-drying **PA6 CF30 at 80-120°C for 4-6 hours** prior to molding. Proper drying is crucial to prevent hydrolysis and ensure the best possible part quality.
Q: How about your delivery Time?
A: Our general delivery time is 7-15 working days. For a precise schedule for this advanced long carbon fiber composite, we recommend contacting our sales team with your specific requirements.
Hot Tags: bc03b pa6 cf30 carbon fiber, China, manufacturers, suppliers, factory, buy, customized
