LFT-G® LFT-G® PA12-BC03B: Long Carbon Fiber Reinforced PA12 for Bicycle Cup Holders
Engineered for the Ride: Ultra-Lightweight & Strong PA12 LCF30 for Bicycle Cup Holders
For cyclists, every gram counts, but durability and reliability are non-negotiable, especially for accessories like cup holders that face varying terrains and weather conditions. LFT-G® PA12-BC03B, a cutting-edge 30% Long Carbon Fiber reinforced Polyamide 12 (PA12 LCF30), is engineered to meet these precise demands. By incorporating continuous long carbon fibers into a high-performance PA12 matrix, LFT-G® PA12-BC03B delivers an exceptional combination of ultra-lightweight design, high strength, and outstanding resistance to environmental factors. This specialized grade achieves significant weight savings compared to traditional materials while providing the robust performance needed to securely hold bottles over rough roads and trails. PA12's inherent low moisture absorption combined with the strength of carbon fiber ensures excellent dimensional stability and long-term performance, resisting degradation from UV exposure, rain, and sweat. LFT-G® PA12-BC03B allows for sleek, aerodynamic, and highly durable cup holder designs that enhance both the function and aesthetics of any bicycle.
Key Advantages of LFT-G® PA12-BC03B for Bicycle Cup Holders
- Ultra-Lightweight Construction: The combination of PA12 and carbon fiber results in significantly lighter cup holders without compromising on strength, crucial for optimizing bike weight.
- High Strength and Stiffness: Provides the rigidity needed to securely grip bottles and withstand vibrations and shocks during rides.
- Excellent Impact Resistance: Offers superior toughness to resist breaking or cracking from accidental drops or impacts.
- Superior Weatherability: PA12's low moisture absorption and carbon fiber's inertness, combined with potential UV stabilizers, ensure excellent resistance to rain, humidity, and sunlight.
- Chemical Resistance: Resists degradation from water, sweat, and common sports drinks.
- Design Freedom and Aesthetics: Allows for the creation of intricate, aerodynamic shapes and smooth surface finishes that complement bicycle aesthetics.
- Dimensional Stability: Maintains shape and function under varying temperature and moisture conditions, ensuring a consistent fit.
By choosing LFT-G® PA12-BC03B for your bicycle cup holders, you are selecting a material engineered for the demands of cycling performance and durability. This advanced PA12 LCF30 grade empowers bicycle and accessory manufacturers to develop cup holders that are significantly lighter, stronger, more weather-resistant, and aesthetically superior. Explore the possibilities and partner with us to engineer the next generation of high-performance bicycle accessories.
For more technical data, please refer to the specification below, or
Contact Our Experts for Bicycle Accessory Material Solutions
LFT-G® LFT-G® PA12-BC03B (PA12 LCF30) Technical Data Sheet for Bicycle Cup Holders
This document provides technical data for LFT-G® PA12-BC03B, a specialized 30% Long Carbon Fiber reinforced Polyamide 12 (PA12 LCF30) material, specifically engineered for high-performance bicycle cup holder applications. The data presented here is based on typical values obtained from international material suppliers and standards, reflecting the unique properties of this PA12-based LCF grade. Please refer to the specific datasheet of your program for precise LFT material values.
Mechanical Properties
| Property | Value | Unit | Test Standard |
|---|---|---|---|
| Tensile Strength | 220-250 | MPa | ISO 527-1 |
| Tensile Modulus | 19500-21000 | MPa | ISO 527-1 |
| Elongation at Break | 0.5-1.5 | % | ISO 527-1 |
| Flexural Strength | 290-320 | MPa | ISO 178 |
| Flexural Modulus | 12000-15000 | MPa | ISO 178 |
| Notched Izod Impact Strength (+23°C) | 26-42 | kJ/m² | ISO 180/1A |
| Notched Izod Impact Strength (-30°C) | 25-39 | kJ/m² | ISO 180/1A |
Thermal Properties
| Property | Value | Unit | Test Standard |
|---|---|---|---|
| Melting Temperature | 245-269 | °C | ISO 11357 |
|
Heat Deflection Temperature (HDT/A, 1.8 MPa) |
192-210 | °C | ISO 75-1 |
| Coefficient of Linear Thermal Expansion | 3-5 | x 10-5/K | ISO 11359 |
Other Properties
| Property | Value | Unit | Test Standard |
|---|---|---|---|
| Density | 1.15-1.1.18 | g/cm³ | ISO 1183 |
| Specific Gravity | 1.15-1.25 | - | ISO 1183 |
| Flammability (UL 94) | HB or V-2 (depending on grade) | - | UL 94 |
| Moisture Absorption (24 hours) | 0.2-0.5 | % | ISO 62 |
| Shrinkage Rate (Mold Shrinkage) | 0.5-1.0 | % | ASTM D-955 |
| UV Resistance (Weathering) | Excellent (appropriate stabilizers) | - | ISO 4892 |
Chemical Resistance (Typical)
LFT-G® PA12-BC03B exhibits excellent resistance to the following substances relevant to bicycle usage:
- Water and Humidity - Excellent
- Salts - Excellent
- Sweat - Excellent
- Common Sports Drinks - Good
- Oils and Greases - Excellent
- Many Cleaning Agents - Good (Consult specific compatibility charts)
Processing Information (Typical)
Recommended processing conditions for LFT-G® PA12-BC03B for injection molding of bicycle cup holders:
- Melt Temperature: 230-270 °C
- Mold Temperature: 40-80 °C
- Injection Speed: Medium (optimized for fiber length retention and surface finish)
- Holding Pressure: Optimized to minimize warpage and ensure dimensional accuracy
- Drying: Recommended before processing (typically 80-100 °C for 2-4 hours) due to PA base.
Notes and Supplementary Information:
Data Source: This data is compiled based on typical values for PA12 LCF30 from international material manufacturers and standards, specifically referencing the LFT-G® PA12-BC03B grade. LFT-G® PA12-BC03B offers an exceptional combination of ultra-lightweight design, high strength, excellent impact toughness, and superior resistance to moisture, UV, and chemicals. These properties make it an ideal material for high-performance bicycle cup holders and other outdoor cycling accessories requiring durability and minimal weight. Please consult specific regulatory compliance documentation relevant to bicycle components. For precise and specific data for your program, please consult the datasheet provided by our material expert.
Hot Tags: LFT-G® LCF30 PA12 For Bicycle Cup Holder, China, manufacturers, suppliers, factory, buy, customized
