LFT 50% LCF Nylon 12 Reinforced Thermopastic
What Is LCF50 PA12?
LCF50 PA12 is a high-performance long-fiber composite material with a PA12 (polyamide 12/nylon 12) matrix and 50% long carbon fibers reinforcement.
Through the synergistic reinforcement of high-content long carbon fibers and the PA12 matrix, the material not only maintains the low moisture absorption, chemical resistance, toughness and good dimensional stability of PA12, but also achieves higher stiffness, strength, creep resistance and long-term structural stability.
LCF50 PA12 Metal Replacement Value
One of the important application directions of LCF50 PA12 is metal substitution.
Metal substitution does not simply replace the original aluminum parts with plastic without any modification. Instead, it requires a re-design of the structure.
By leveraging the reinforcing effect of long carbon fibers, internal stresses in the product can be redistributed through stiffeners, appropriate wall thicknesses, local reinforcements, cavity designs, and integrated structures.
Therefore, LCF50 PA12 not only leads to a reduction in material weight, but also brings about: weight reduction of the material + structural optimization + component integration + injection molding + manufacturing simplification.
This comprehensive advantage is the core value of LCF50 PA12 in the metal substitution project.
What can LCF50 PA12 Offer?
LCF50 Nylon 12: Where Can It Be Applied?
The LCF50 PA12 is not the most suitable for ordinary plastic parts, but rather for products that have already entered the "high-performance structural component" stage. LCF50 PA12 is suitable for applications in the fields of automobiles, robots, industrial equipment, unmanned aircraft, aerospace, and high-performance machinery.
Choosing LCF50 PA12 can Solve:
- Insufficient stiffness → Enhance structural stiffness
- Long-term deformation → Improve resistance to creep
- Product is too heavy → Achieve lightweighting
- Size variation → Improve size stability
- Complex metal processing → Consider injection molding integration
- Insufficient performance of common reinforcing materials → Provide higher-grade long carbon fiber reinforcing solutions
Frequently Asked Questions
Can LCF50 PA12 replace metal?
+
-
It can be used in certain applications where metal replacement is needed, but it should not be simply assumed that all metal parts can be directly substituted. A specific evaluation is required based on the product's load, stiffness, temperature, fatigue life, safety factor, and structural design.
Is LCF50 PA12 suitable for injection molding?
+
-
Suitable. LCF50 PA12 is a thermoplastic long-fiber composite material that can be used for injection molding. However, due to the presence of 50% long carbon fibers, it is necessary to carefully control factors such as shear, screw speed, back pressure, gate design, and flow channel design to maintain the length of the long fibers as much as possible.
Why is PA12 suitable for humid environments?
+
-
Compared with some other nylon materials such as PA6 and PA66, PA12 has a lower moisture absorption property. Therefore, it usually exhibits better dimensional stability in environments with varying humidity. On this basis, LCF50 PA12 further improves structural stability by incorporating long carbon fibers.
Under what circumstances should one choose LCF50 PA12?
+
-
When the product has issues such as insufficient stiffness of common PA12, long-term deformation under load, excessive product weight, high requirements for dimensional stability, or the need to replace part of the metal structure, LCF50 PA12 can be selected as a key candidate material for evaluation.
How To Cooperate With Us?
Choosing LCF50 PA12 is not merely about selecting a high-strength material. The true applications of LCF50 PA12 are those products that cannot be solved by ordinary engineering plastics alone.
It combines the low moisture absorption, chemical resistance and good toughness of PA12 with the high stiffness, high strength, anti-settling and lightweight capabilities of long carbon fibers, enabling the material to enter higher-demand structural applications.
Our address
5F, Building B, NO.55, Hongxi South Road, Torch High-tech Zone, Xiang'an District, Xiamen, Fujian, China.(361101)
Phone Number
+86 19176646717
sale03@lfrtplastic.com
Hot Tags: lft 50% lcf nylon 12 reinforced thermopastic, China, manufacturers, suppliers, factory, buy, customized
