High Impact Glass Fiber PP

High Impact Glass Fiber PP

Xiamen LFT Composite Plastic Co.,Ltd is a unique long fiber reinforced thermoplastics plastic manufacture.
Our material have following properties.
1.Improved impact
2.Safer impact mode
3.Reduced warpage
4.Improved creep resistance

Send Inquiry

High Impact Glass Fiber PP


Uniqueness of long fiberimage.png

◆SGF:Short glass fiber reinforced thermoplastic particulate material, average retention 

length of glass fiber in parts: 0.2-0.4mm

◆LFT-G:Injection molding grade long glass fiber thermoplastic material, glass fiber in

 the parts 

of the average retention length of 1-3mm

◆LFT-D-ILC:Long fiber reinforced thermoplastics in the molding, the glass fiber in the 

parts of the average retention length of centimeter

long fiber's advantage1.jpg


Product Detailsimage.png

Product nameHigh Impact Glass Fiber PP

Color

Natural



Feature

Composite 10%-70% by weight fiber content

Pultrusion melt impregnation process 

The unique unoriented fiber network structure makes the high temperature and high temperature of high temperature and low temperature change in high temperature.

Grade

Injection Moulding

Country of origin

China

Packing25KG/Bag
MOQ251 ton

long glass fiber pp.jpg


Product Specificationimage.png



Test methodUnitPP-NA-LGF20PP-NA-LGF30PP-NA-LGF40PP-NA-LGF50
Content
%20304050
DensityISO 1183g/cm31.0381.1211.2251.336
Tensile strengthISO 527-2MPa93112128146
Impact Strength(Izod notched)ISO 180/1AKJ/m2192427
39
Impact Strength(Izod unnotched)ISO 180/1AKJ/m247545863
Flexural StrengthISO 178MPa130165180204
Flexural modulus
ISO 178MPa45006600802011500

Use a reverse barrel profile. To maximize fiber length, the following injection 

barrel, screw, and tip designs should be followed. L/D ratio 16/1 - 22/1, 

Compression ratio 2:1, Flight depth 0.200 in (5 mm) minimum, in feed section, 

Screw diameter 0.65 - 0.80 in (16.5 - 20 mm) minimum, Compression section 

length 12 - 13 diameters, Check ring valve assembly - free flow type no 

restrictions, Nozzle orifice 0.250 in (6 mm) diameter. Feed throat from 

hopper to machine must have sufficient opening to prevent bridging of 

long pellet composition.


Application Rangeimage.png

PP-LFT application.jpg

Packing & Shippingimage.pngpacking.png

LFT Certificationimage.png

证书1.jpg

证书2(2).jpg

LFT Team

image.png

图(1).jpg

Contact Us

image.png

Candy Hu.jpg






Inquiry