PPS 30% Long Carbon Fiber

PPS 30% Long Carbon Fiber

Xiamen LFT Composite Plastic Co.,Ltd is a unique long fiber reinforced thermoplastics plastic manufacture. Our long carbon fiber pps lft have following properties. 1.Improved impact 2.Safer impact mode 3.Reduced warpage 4.Improved creep resistance

Send Inquiry


PPS 30% long carbon fiber

             



PPS 30% long carbon fiber 

50% Long Glass Fiber Reinforced PA 6.png

 Thermal cycling at higher temperatures increased the degree of crystallinity of PPS, as indicated by increasing heat of melting. CTE measurements during thermal cycling were used to study the anisotropy of the composites in directions parallel and transverse to the fiber orientation. It was noted that increasing crystallinity enhanced the tensile modulus of unidirectional composites, while reducing the tensile modulus of quasi‐isotropic composites. The latter reduction may be due to internal damage or interlaminar slippage associated with the residual thermal stresses caused by thermal mismatch between multiply oriented plies.Long Carbon Fiber pps granules.jpg


Data sheet of PPS-LCF30

50% Long Glass Fiber Reinforced PA 6.png

TDS of pps lcf30.JPG

The data is only typical data and is for reference only. If you want to know more detailed information, please contact me in time. I will give you professional advice.

LFT certification

50% Long Glass Fiber Reinforced PA 6.png

  Contact Me

50% Long Glass Fiber Reinforced PA 6.png

contact of pps material.jpg

Inquiry