30% Long Carbon Fiber Reinforced PA 6

Xiamen LFT Composite Plastic Co.,Ltd is a unique long fiber reinforced thermoplastics plastic manufacture.
Our material have following properties.
1.Improved impact
2.Safer impact mode
3.Reduced warpage
4.Improved creep resistance

Send Inquiry

30% long carbon fiber reinforced PA 6


1. Product Introduction of the 30% long carbon fiber reinforced PA 6

The interface between the PA 6 matrix and the carbon fiber is very good. The tensile strength, tensile modulus and bending strength of PA 6 / LCF composites increased with the increase of CF content, and higher than short carbon fiber reinforced PA 6 composite. The melting temperature and thermal degradation temperature of composite materials are not affected by the addition of CF, and the crystallization temperature is affected by the addition of CF. PA 6, also known as polycaprolactam. It's not exactly a condensation polymer, because its polymer contains all the atoms in it. The structure of PA 6 shows that the structure of PA 66 is slightly different from that of PA 6, but the performance of the two materials is basically the same.

PA 6(Polyamide 6)PA 66(Nylon 66)


2. Product Specification of the 30% long carbon fiber reinforced PA 6

1.Model Number: 30% long carbon fiber reinforced PA 6

2.Filler: long carbon fiber

3.Color: custom colors

4.Process method: Injection molding

5.Packing:25kg/bag(also customizable)


3. Product Feature of the 30% long carbon fiber reinforced PA 6

1. Excellent impact resistance, self-lubricity, good wear resistance and drug resistance;

2. Low temperature characteristics and self-extinguishing

3. Good insulation, high rigidity, stable dimension.

4. Production flow


5. Range of application

30% long carbon fiber reinforced PA 6 has the characteristics of light weight, wear resistance and corrosion resistance, so it is suitable for manufacturing helmet, robot arm and bumper.

171632.png  171633.png  171634.png

6. Company information

Xiamen LFT composite plastic Co.,Ltd using proprietary pultrusion process of LFT fell long fiber composite particles, the process using PP, PA, PBT, TPU, PPS, PPA, PEEK thermoplastic polymer matrix impregnating continuous carbon, such as glass or other special fiber. Our compound granule products are formed by using injection molding, extrusion or compression molding process.