WELCOME TO OUR COMPANY



Xiamen LFT Composite Plastic Co.,Ltd




Technical Data Sheet

TIM截图20180125090344.1.png

LFT-G® TPU-NA-LGF20

Product name

● LFT-G®TPU-NA-LGF20

Polymer Matri

● Rigid Thermoplastic Polyurethane

Fiber Type

● Long glass fiber

Fiber Content

● 20%

Color

● Natural, and custom colors

Processed method

● Injection molding


PhysicalTypical CharacteristicTesting Standard
TIM截图20180125090344.1.png

Specific Gravity   

1.33  g/cm³  ASTM D-792

Molding Shrinkage   

 0.10 - 0.20 % 

ASTM D-955

(1/8 in (3.2 mm)section)


MechanicalTypical CharacteristicTesting Standard
TIM截图20180125090344.1.png

Tensile Strength 

145  MPaASTM D-638

Tensile Modulus 

6897  MPaASTM D-638

Tensile Elongation 

3 - 4  %ASTM D-638

Flexural Strength

221  MPaASTM D-790

Flexural Modulus 

6207  MPaASTM D-790

Notched Izod Impact

277  J/mASTM D-256

Un-Notched Izod Impact  

1190  J/mASTM D-4812


Thermal Typical CharacteristicTesting Standard
TIM截图20180125090344.1.png

Deflection Temperature

@ 264 psi (1820 kPa)

85  ℃ASTM D-648


FlammabilityTypical CharacteristicTesting Standard
TIM截图20180125090344.1.png

Flame Retardant

HB @ 1.5  mmASTM D-635


Injection Typical Characteristic
TIM截图20180125090344.1.png

Injection Pressure

69 - 110  MPa

Melt Temperature

250 - 280 ℃

Mould temperature 

50 - 110   ℃

Pre-drying  

6 hrs @ 108 ℃

Moisture Content  

0.01  %

Processing Notes

TIM截图20180125090344.1.png

Molding guidelines and processing conditions for LFT-G® long fiber composite pellets are available in our Material Processing Guide. Please contact our technical support team if you require additional information regarding processing a particular product or guidance resolving problems.

Values included in this Property Data Sheet are based on limited laboratory test specimens. These values are typical values and are not meant to be used for setting maximum or minimum values for specification purposes. Any determination of the suitability of the materials shown in this property data sheet for use by the end user is the sole responsibility of the user, who must assure himself that the material as subsequently processed meets the need of his particular product or use. To the best of our knowledge the information in this publication is accurate and reliable, LFT-G® does not assume any liability whatsoever for the accuracy of this information.

Web: www.lfrt-plastic.com

Email: candyhu@lfrtplastic.com

Tel: 86 18659069962

Availability: Global


Download PDF Files

 

▶  LFT-G ® TPU-NA-LGF20未命名_副本.jpg